{"product_id":"morev-cg-6-pin-dc-dip-switch-cdi-box-with-adjustable-rev-limiter-for-125-250cc-dirt-bike-atv","title":"MOREV CG 6-Pin DC DIP Switch CDI Box with Adjustable Rev Limiter for 125–250cc Dirt Bike \u0026 ATV","description":"\n\u003cp\u003e\u003cstrong\u003eAdjust your CDI's electronic rev-limiter mode to match your riding setup.\u003c\/strong\u003e The MOREV CG 6-Pin DC DIP Switch CDI is designed for selected CG125–CG250 four-stroke vertical engines using a compatible \u003cstrong\u003e6-pin (4+2) battery-powered DC CDI ignition system\u003c\/strong\u003e. Its four-position DIP switch offers eight selectable rev-limiter presets and a separate mode without the module's selected electronic rev-limit restriction. It is suitable for select dirt bike, ATV and go-kart applications only when the ignition power supply, connectors and terminal assignments match.\u003c\/p\u003e\n\u003ch2\u003eDIP-Switch Adjustable Rev Limiter\u003c\/h2\u003e\n\u003cp\u003eUse \u003cstrong\u003eswitches 1–3\u003c\/strong\u003e to select one of eight preset limiter settings from the chart printed on the back of the CDI. \u003cstrong\u003eSwitch 4\u003c\/strong\u003e changes between the electronic speed-limit mode and the no preset rev-limit mode. The printed chart indicates the specified upper position of switch 4 activates speed-limit mode. Confirm each individual switch combination from your module's actual label.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo preset rev-limit mode\u003c\/strong\u003e means that this CDI does not apply its selectable DIP-programmed rev ceiling. This does not remove the engine's mechanical limits or ensure that an engine can operate safely at any speed. Effective operation depends on the pickup, ignition coil, power system, engine condition and other vehicle components. Unlike a MOREV digital 9-Curve CDI, this DIP model is for selecting \u003cstrong\u003erev-limiter settings and operating modes\u003c\/strong\u003e, not for choosing nine ignition timing curves.\u003c\/p\u003e\n\u003ch2\u003eHow to Set the Four DIP Switches\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn off the engine and ignition\u003c\/strong\u003e before adjusting the switch bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead the DIP setting chart\u003c\/strong\u003e on the CDI's outer label.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet switches 1, 2 and 3\u003c\/strong\u003e to the desired preset combination shown in the chart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet switch 4\u003c\/strong\u003e to choose speed-limited operation or no preset rev-limit mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify all four switch positions before installation\u003c\/strong\u003e and test only in a safe, controlled environment.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCG Engine and Vehicle Compatibility\u003c\/h2\u003e\n\u003cp\u003eDesigned for selected \u003cstrong\u003eCG125, CG150, CG200 and CG250 four-stroke vertical-cylinder engines\u003c\/strong\u003e equipped with a \u003cstrong\u003eCG 6-pin DC CDI (4+2)\u003c\/strong\u003e harness. Reference engine codes may include \u003cstrong\u003e156FMI, 162FMJ, 163FML and 167FMM\u003c\/strong\u003e. Some TaoTao, Roketa, SunL and Coolster dirt bikes, ATVs and go-karts use related engine configurations, but \u003cstrong\u003emodel name, displacement and connector shape alone do not guarantee compatibility\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore purchasing:\u003c\/strong\u003e compare your original CDI's power supply, connector shape, locking tabs and each terminal assignment. This version is designed for \u003cstrong\u003eDC battery-powered ignition\u003c\/strong\u003e. It is not a substitute for a CG 6-pin AC CDI, and CG\/GY6 6-pin plugs are not automatically interchangeable.\u003c\/p\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e MOREV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e MCDI022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e DIP-switch adjustable CDI ignition box with rev-limiter mode control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition supply:\u003c\/strong\u003e Battery +12V DC CDI system only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e CG-style six-pin, 4+2 white connector arrangement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e Four-position DIP switch bank; switches 1–3 select eight presets and switch 4 selects mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Upgraded purple housing with updated internal components and red DIP switches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Approximately 50 mm width × 75 mm body height × 50 mm depth as illustrated; manual measurements may vary slightly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCG 6-Pin DC Wiring Reference and Safety\u003c\/h2\u003e\n\u003cp\u003eThe supplied \u003cstrong\u003eterminal-side\u003c\/strong\u003e connector diagram identifies \u003cstrong\u003eterminal 1\u003c\/strong\u003e as pickup\/trigger signal, \u003cstrong\u003e2\u003c\/strong\u003e as ignition coil output, \u003cstrong\u003e3 and 4\u003c\/strong\u003e as grounds, \u003cstrong\u003e5\u003c\/strong\u003e as kill switch\/engine stop and \u003cstrong\u003e6\u003c\/strong\u003e as the power input. On \u003cstrong\u003ethis DC-only model, terminal 6 must connect to the proper battery +12V DC ignition supply\u003c\/strong\u003e, not to the stator exciter AC power feed. Verify the actual connector orientation and vehicle harness before connection. Both ground terminals must be connected according to the product wiring reference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e The illustrated terminal map references common AC\/DC connector positions, but this product is \u003cstrong\u003eDC ONLY\u003c\/strong\u003e. Never connect the stator AC power and battery DC power together, and do not feed AC exciter power into this DC CDI. Incorrect wiring can cause a no-start condition, electrical malfunction or damage. Disconnect electrical power before installation and consult a qualified technician whenever the wiring is uncertain.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes it offer eight rev-limit settings?\u003c\/h3\u003e\n\u003cp\u003eSwitches 1–3 provide eight predefined switch configurations for the limiter selection. Switch 4 selects between the limiter mode and the no preset rev-limit mode. Follow the chart printed on the product to select the proper positions.\u003c\/p\u003e\n\u003ch3\u003eDoes this CDI work with CG 6-pin AC ignition?\u003c\/h3\u003e\n\u003cp\u003eNo. This version requires a matching \u003cstrong\u003eCG 6-pin DC\u003c\/strong\u003e ignition system with battery +12V input. AC and DC ignition boxes are not interchangeable.\u003c\/p\u003e\n\u003ch3\u003eDoes the no-limit mode mean unlimited safe RPM?\u003c\/h3\u003e\n\u003cp\u003eNo. It disables this module's DIP-programmed rev-limit selection; it does not override engine mechanical limits or provide a promise of higher performance.\u003c\/p\u003e\n\u003ch3\u003eWill this fit all 150cc or 250cc dirt bikes?\u003c\/h3\u003e\n\u003cp\u003eNo. Verify engine family, DC ignition power source, connector position and individual terminal wiring against your existing CDI before ordering.\u003c\/p\u003e\n\u003ch2\u003eShipping and Compatibility Support\u003c\/h2\u003e\n\u003cp\u003eMOREV ships orders from Guangzhou, China. Available shipping services and prices depend on your destination and are calculated at checkout. If you are unsure whether your CDI is AC or DC, \u003ca href=\"\/pages\/contact\"\u003econtact MOREV\u003c\/a\u003e with clear photos of the original CDI and connector.\u003c\/p\u003e","brand":"MOREV","offers":[{"title":"Default Title","offer_id":67942448857323,"sku":"MCDI022","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0859\/8283\/9019\/files\/morev-dip-cg-dc-main.jpg?v=1791624091","url":"https:\/\/shop.morevracing.com\/products\/morev-cg-6-pin-dc-dip-switch-cdi-box-with-adjustable-rev-limiter-for-125-250cc-dirt-bike-atv","provider":"MOREV Racing","version":"1.0","type":"link"}